Products > Battery Charger > New Battery Charger > 12V/24V 110V/220V 30A Lead Acid Battery Charger
Product name : 12V/24V 110V/220V 30A Lead Acid Battery Charger
Item : QW-B30A
Price : E-mail us
 Enlarge Image                   Back
←[Previous Product]             

The brief instruction:

1. The QW series lead acid battery charger is professional designed according to the power battery of electric vehicles equipment.
2. It use the advanced soft switch technology, with small size, convenientinst allation, high conversion efficiency, running fully loaded for a long time, stable output current, large capacity, high reliability, long life features etc.
3. With short circuited protect, low voltage protection, overheated protection function.
4. The long delay digital counter can ensure the battery form the constant voltage to the float charge reliably every time, avoid the lost control of battery heat caused by the high temperature.
5. Make the damage of battery drop to the loest caused by the dehydration and the polar plate vulcanize which are the two general problems of charger, MAD.


Technical Parameter:

Model No. QW-B30A
Input voltage AC110V or 220V+/-10%, 50hz
Rated voltage DC12V or 24V
Constant charge current 30A+/-5% or 20A+/-5% 
Constant charge voltage 14.5-14.8V or DC27v+/-0.2v
Floating voltage 13.8V or 27.6
Charge mode 4-stage
Charging current: less 5a, green light/red light conversion
Reverse connection protection: yes


Over-heat protection: When the temperature of charger shell over 85ºC, the charing current auto reduced to half of the orifinal current, when the temp. over 105ºC, the charger protective turn off, this moment no current input, auto recover charge when the temp. fall to about 80ºC.

Short-circuit protection: When the charger input happen to short-circuit, the charger input auto turn off the charge will charge again after restart.

Low-pressure protect: When the battery simple lattice lower than 1.4V, the charger protective turn off or unable to start to avoid the damage equipment when the battery doesn't match the charger nominal voltage.

Four-stage charging:

Pre-charge: In order to protect the battery and extend its life, the battery's internal resistance is too large or voltage is too low because the discharged time is too long or it is not used for a long time, the charger will supply low output vurrent for the battery automatically. When voltage of the battery rises to the given voltage value, the charge mode will turn to constant current charge mode automatically.

Constant current: The charger supply constant charge current for the battery.

Constant voltage: Using the pulse width modulation (PWM) tech to control the charging current and output voltage of the charger which ensure the battery is charged fully and avoid over charged.

Floating charge mode:
When the voltage of the battery is closing the value of the constant voltage mode, and the current cut down to the given current gradually, that is meant the battery power is full, then the pilot lam will turn green and the fan will stop working. The charger will turn the mode into floating charge mode automatically. At this moment, the battery can be stopped charge or kept on flating


Related Products :
12V/24V 110V/220V 20A Intelligent Battery Charger
12V/24V 110V/220V 20A Intelligent Battery Charger
12V or 24V 10A Lead Acid quick-charging Battery Charger
12V or 24V 10A Lead Acid quick-charging Battery Charger